Conceptualization
Mr. Sjoberg chose 85 engineers, and this group was named "Team Viper". Their effort on this new muscle car began in March of 1989. The team began the design and fine tuning of the interior and body with the help of American automotive legend Carroll Shelby, and the engine design was actually done outside of the design team. The design instructions were to keep the car as close to the concept as possible, as to make the car perfectly street legal and lend itself to daily driving, without losing the race ready look and abilities. The body was completed by mid Fall, and by December of 1989 the design team had themselves a running, test-ready pre-production model. This completed Dodge Viper used a tubular steel frame wrapped in a resin transfer molding fiberglass body, and it tipped the scales at a modest 3280lbs.

While undergoing a great deal of the grueling pre-production testing, the "mule cars" (vehicles built which don't have street car items such as airbags, stereo, air conditioning, etc.) were fitted with eight cylinder engines, but the design team wanted something more; something that would add some extra personality to this new car. During this time in history, Chrysler Corporation had a subsidiary interest in Lamborghini, and considering Lamborghini's long standing reputation for ultra-high performance engines, they were commissioned with the task of designing the engine for this beast. They were given a V10 engine which had been developed for use in the new generation of the Dodge Ram, which would be launched in 1994. This new V10 was based off of the LA Engine, and was basically a 5.9 L engine used in the trucks, with a slightly longer stroke and two extra cylinders, but more or less, the V10 was based off of the V8s of the time. The engineers at Lamborghini took the existing cast iron V10, and produced an aluminum version, altering the head design as well as some other internal features, and made significantly more power. They intended to also convert the 2 valve setup to a 4 valve setup, as they did not feel that they could reach the engines full potential with a 2 valve per cylinder setup, but due to the added cost, Chrysler management decided to stay away from the 4 valve design. When they were finished, this vicious new engine was capable of making 400 horsepower at 4600 rpm, and 450 lb-ft of torque at 3600 rpm. While providing a great deal of power, this engine also proved to offer about 21 miles per gallon when driven with a light foot.

The V8 was removed from the test vehicle in February of 1990 when the new all-aluminum V10 was ready, and only a few months later, in May of 1990, Chrysler Chairman Lee Iacocca gave Team Viper the official thumbs up to begin production of the Dodge Viper. The Viper was slated for a 1992 model year introduction, and to increase public awareness of this new American machine, Carroll Shelby drove the car as the pace car of the Indianapolis 500 in 1991. Early November of 1991 marked the first group of production 1992 Dodge Vipers, intended entirely for review and further testing, and just two months later, in early January of 1992, the first of the publicly ordered 1992 Dodge Viper RT/10s were delivered.

First Generation
When the first year of Viper's hit the showroom, there were no options, but very few Viper buyers complained. All of the 1992 Vipers were Viper Red, with gray leather high-back bucket seats; fitted with 17" three spoke cast aluminum wheels and Michelin high performance tires, and a 488 cubic inch aluminum V10 mated to a 6 speed manual transmission. The manufacturer's suggested retail price (MSRP) was $50,700, but with only 285 produced for the 1992 model year, they were near impossible to get for a price anywhere near that price. There was no hardtop option, and it came only as a roadster with a soft vinyl top with sliding plastic windows included, but they were not very attractive, and were not very popular. The 1992 Vipers were equipped with a side mounted exhaust system, a limited slip differential, 4 wheel disc brakes with 4 piston calipers over vented rotors, a premium AM/FM/Cassette sound system, and 4 wheel independent suspension. The 1992 Viper was one of the fastest production cars in the world, ripping off an impressive 12.9 second at 113.8 mph in the standing quarter mile (although that quarter mile time is hindered by the difficulty in launching a stock tire Viper on a drag strip) and on the oval track, the Viper turned in a top speed of 165 mph. The public interest around this car, combined with the price increase by dealerships caused this car to be far too expensive for most people, and is still a rare collectable today.

1993 brought about very few changes for the Viper. The engine, transmission, wheels, interior, and overall appearance remained the same, with the exception of the removal of the external antenna from the drivers side rear fender. Black was added as an external paint offering, but everything else remained the same. However, as opposed to the unpopular soft top, a removable hard top was offered, but at the hefty price of $2,500. There were about 1043 Vipers built in 1993, with most of them still coming in Viper Red.


1994 was another slim year for changes, with all of the basic items remaining the same. There were 2 more colors added, Yellow and Emerald Green. Also, a new tan interior, with a black dash was offered. The sound system received an upgrade, but the new stereo was still only AM/FM/Cassette. One noticeable change was the increase in price, up to $55,200 (MSRP).

1995 was the same basic Viper as it had been in the first three years of it's existence, and the colors, both interior and exterior, were the same as they had been in 1994 model year Vipers. There were likely no changes due to the fact that this was the intended last year for the first generation of the Viper.

Second Generation
The 1996 Viper officially began the second generation of the Viper, but the RT/10 looked very similar to the previous years' Vipers. The biggest news was the addition of a coupe, named the Viper GTS. There were new colors offered, such as White, and a new striping package with varying colors was offered. The three spoke aluminum rims were no longer offered, and in their place, a polished or painted 5 spoke 17" aluminum wheel was standard. While the Viper still came packed with the 8.0L, 6 speed manually shifted V10, the second generation boasted a gain of horsepower and torque, to 415 horsepower and 488 lb-ft of torque in the RT/10, and 450 horsepower in the GTS, thanks in part to the free flowing exhaust which exited through the rear of the car, as opposed to exiting by means of the side pipe exhaust. The GTS also featured an interesting roof line which had a "double bump" shape. This was done in order to affect aerodynamics as little as possible, but at the same time, it allows for a taller driver and passenger to fit in the car while wearing helmets. Other than the occasionally addition or deletion of color options, virtually nothing changed over the course of the run of the second generation Viper, from 1996-2002.


However, during the second generation the Viper began making a name for itself in worldwide professional racing circuits, as well as slowly becoming a popular car to modify thanks to the introduction of several Viper-specific aftermarket performance companies. Also, it was during this time that Chrysler Corporation contacted French racing organization Team Oreca about taking the reigns of development/advancement of a race trim Viper for intended competition in the FIA GT Championship in the GT2 class. This new trim line was called the Viper GTS-R, and featured several options, the most obvious of which was the large rear wing. The GTS-R also packed 700 horsepower, as opposed to the normal 450, but the 100 street ready GTS-Rs built/sold came equipped with only 460 horsepower and 500 lb-ft of torque.

Team Oreca originally carried a paint scheme which fit in with both French and American national colors. The car had an asymmetric blue and red striped design on a white car, and the most familiar of their cars wore the numbers 51, 52, and 53. Team Oreca drove the GTS-R to GT2 Championships in 1997, 1998, 1999, 2001, and 2002, as well as winning its class in the 24 hours of Le Mans in 1998, 1999, and 2000.

Later on, Team Oreca changed to an all red design with white stripes and trim, and it was in this red and white GTS-R, wearing the number 91, that the Team won the 2001 Rolex 24 at Daytona International Speedway.

The second generation also marked the introduction of the Viper to the European market, popularized by the success of the Team Oreca race cars. However, the Viper was badged as a Chrysler due to legalities overseas, but it is the same car sold here in the United States.

While the Viper had gradually gained popularity over the first few years of it's existence, the second generation were the models which really brought the Viper into the worldwide public eye. Having it plastered all over magazines, the television, and the internet helped to boost not only sales, but also the aftermarket, and soon, Vipers boasting 1000+ horsepower were popping up around the country. Whether in stock or modified, Vipers became far more common at tracks of all type, and they were competitive regardless of the level of modification thanks to the quality of production, and the high amount of engineering which went into the development of the car as a whole. But, as time went on, other companies were catching up. Ford Motor Company announced the intended released of their factory supercharged Mustang Cobra, and with the non-stop evolution of the Corvette, Ford and GM were hot on the heels of the Viper. So, Dodge announced in 2002 that the following year would offer no coupe or roadster, and the car would be completely redesigned, with a new name, and a new motor.

Third Generation
The release of the new Viper was long awaited, even though there had been no lull in production. The world was on the edge of their seats as the 2003 Dodge Viper SRT-10 was revealed to the world at the North American International Auto Show. While the new Viper was distinctly a Viper, it was fully redesigned, as a convertible. The previously rounded edges had been ditched for sharp muscular angles, and this hot new Viper was set on huge 18 inch wheel set on the front, and on the rear, 19 inches of high gloss polished aluminum wheel. The hood no longer opened to the front, taking the fenders with it, but instead, the new Viper had a standard center section style hood. Another key addition to the new Viper was what helped name it, which was the new V10. The Lamborghini engine was a great design, but the need for more power led the company (now called DCX due to Chrysler merger with Mercedes Benz) to enlist the Viper into their new Street and Racing Technology division for the full redesign and new engine. This division of DCX, also called SRT, is what lends its name to the Dodge Viper SRT-10. This new engine was an all aluminum 8.3L and with 504 horsepower and 525 lb-ft of torque, this new Viper was once again the reigning American performance car. The SRT-10 was substantially more, with a price tag of over $85,000, but even so it was instantly popular, and companies began making performance parts for this new monster.

The only thing missing was a hardtop, and for the 2006 model Dodge debuted its new SRT-10 Coupe at the 2005 NAIAS. Offered in a variety of colors this new Viper offers all of the performance of the rag top, but with the convenience and chassis rigidity of a hardtop, and to give a bit of a retro look (if a car only 4 years old can be retro) the SRT-10 Coupe retains the GTS Coupe tail lights, with the integrated rear wing wrapping over the top of the back end.

Dodge has recently began offering the new Viper Competition Coupe, which is very much like a modern day, SRT built GTS-R. Unlike the GTS-R, this new Comp. Coupe is not street legal, and can only be purchased directly from DCX. The Comp. Coupe has literally no accessories which are not required for race use. There is no radio, no heat or air conditioning, no interior trim panels, and no other items that don't make the car go faster, and what is included? A full racing roll cage, a fuel cell, Hoosier slick tires, and a full race-ready body, not to mention the custom electronic race gauges and seats. The GTS-R was meant to be a street car that could be raced with some modification, but the Comp Coupe allows no mistake; it is a race car.

- Patrick Rall